hardware:promax:calibration:reseatremovablesensor
Reseating Removable Sensors
To reseat a removable sensor, simply follow the steps outlined the images below.
This process will be the same for both 2D and 3D sensors.
If you have a fixed sensor, please refer to our document HERE
If you need to clean the contacts on the sensor or sensor holder, only use dry cleaning methods such as microfiber cloths, or pencil erasers. Avoid liquids such as alcohol or water. This may damage the sensor.
hardware/promax/calibration/reseatremovablesensor.txt · Last modified: 2021/05/25 11:46 by admin