Planmeca Tech Wiki

User Tools

Site Tools

You are here: Planmeca Tech Support Wiki » Hardware » ProMax Troubleshooting » Calibration Documents » Changing the IP of Promax 2D unit
hardware:promax:calibration:changepromaxip2d

Table of Contents

Changing the IP of Promax 2D unit

Wrench Menu (Protouch)

  1. Press the wrench in the top left corner of your home screen
  2. press the Network Setting (1400) menu
  3. Change the IP to the desired address
    1. Make sure to change both the unit and Protouch (GUI) IP at the same time

i Menu (Color GUI)

  1. Press the “i” in the bottom left corner of your home screen
  2. Press Special Functions (i400)
  3. Press network settings menu (i480)
  4. Press TCP/IP (i48.2)
  5. Change the IP to the desired address

hardware/promax/calibration/changepromaxip2d.txt · Last modified: 2022/04/07 10:08 by cstinnett